النتائج 1 إلى 4 من 4

الموضوع: سؤالين مستعجلة للخبراء

  1. #1



    توقف الجهاز لدي على هذه العبارة بعد تشغيل الجهاز ولم يعد يستقبل اي امر

    verifying dmi pool data


    السؤال الثاني :..

    عندما اقوم بتسشغيل برنامج الاوت لوك اكسبرس تطلع لي هذه الرسالة

    (( تعذر بدء تشغيل outlook express بسبب تعدر تحميل msoe.dll



    فمالحل ...





    الدبور غير متواجد حالياً


  2. #2


    للرفع





    الدبور غير متواجد حالياً

  3. #3
    عضو سوبر نشيط
    تاريخ التسجيل
    Nov 2000
    المشاركات
    831

    verifying dmi pool data



    السلام عليكم

    اولا اعتذر عن اسلوب لصق ونسخ نظرالضيق الوقت
    ثانيا لم يحدث هاي المشاكل معي من قبل فسوف اضع الحلول لمشكلتك من المصادر أخرى في هذا الخانة على امل ان تستفيد منها:
    *****************************************************
    verifying dmi pool data
    *****************************************************



    Verifying DMI Pool Data in Windows 95/98

    Disclaimer: This information is provided as is without any warranty of any kind, either expressed or implied. In no event will DEW Associates Corporation be liable to you for any damages, including any loss of profit or savings, arising out of the use or inability to use the information contained in this document. DEW Associates Corporation makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

    Overview:

    The Desktop Management Interface (DMI) is a new method of managing computers in an enterprise. The main component of DMI is the Management Information Format Database, or MIFD (the DMI Pool Data). This database contains all the information about the computing system and its components.

    At times, some systems may experience a hang condition after partitioning, formatting and initial boot-up of a hard drive. In Windows 95 and 98, changes to the motherboards BIOS settings, changes in hard drives or to hard drive settings alters this pool data. The message, "Verifying DMI Pool Data" appears and the system hangs. This condition may continue even after the physical drive has been removed from the system.

    ! WARNING ! ALL SUGGESTIONS LISTED HERE ARE BIOS RELATED. FOR A PERMANENT SOLUTION, WE RECOMMEND THAT USERS CONSULT THEIR SYSTEM OR MOTHERBOARD MANUFACTURER FOR BIOS UPGRADES.

    Possible Resolution Methods:
    ___________________________________________________________
    Method One:

    Apply power to the computer.
    Access the system BIOS.
    Set the drive type as None or Not Installed.
    Then Load the BIOS Defaults
    Then Load the SETUP Defaults
    Save the BIOS changes and reboot the PC to a System Boot Diskette.
    Shut down the PC after the memory count is displayed.
    Reconnect the power and interface cables to the hard drive.
    Access the System BIOS.
    Auto-Detect the hard drive. Ensure that the LBA Mode option is enabled.
    Save the BIOS changes and restart the PC with a System Diskette.
    Partition and format the hard drive via the operating system.
    Restart the system. On boot, the screen should read:

    Verifying DMI Pool Data
    Update Successful
    The system should continue booting normally.
    __________________________________________________________
    Method Two:

    Apply power to the computer.
    Access the System BIOS.
    Disable both the Internal and External CPU Cache. These features are located in either the "BIOS Features" or "Advanced Settings" options of the BIOS Setup.
    NOTE: Consult the System or Motherboard User's Manual for exact location of the Internal and External CPU Cache settings.
    Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:
    Verifying DMI Pool Data
    Update Successful
    The system should continue booting normally.

    After the system successfully boots, re-start the PC and access the system BIOS.
    Enable the External CPU Cache. This feature is located in the "BIOS Features" or "Advanced Settings".
    NOTE: Consult the System or Motherboard User's Manual for exact location of the External CPU Cache setting.
    ! WARNING ! User's MUST re-enable this feature after resolving the problem for optimal system performance.
    Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:

    Verifying DMI Pool Data
    Update Successful
    The system should continue booting normally.

    NOTE: If the aforementioned methods fail to resolve the issue, contact the system or motherboard manufacturer to either clear the CMOS or flash update the BIOS for your motherboard. This will entail either:

    Removing the "Clear CMOS" Jumper and resetting the system BIOS; or.
    Obtaining and applying a Flash BIOS Upgrade for your motherboard.

    للاسف معندي وقت لللترجمة )-:







    __________________
    Like your body your mind also gets tired so refresh it by wise sayings.
    limur غير متواجد حالياً

  4. #4
    عضو سوبر نشيط
    تاريخ التسجيل
    Nov 2000
    المشاركات
    831

    msoe.dll



    The information in this article applies to:

    Microsoft Outlook Express version 5 for Windows 98



    *******
    SYMPTOMS
    *******
    When you start Outlook Express or are receiving e-mail, you may receive one of the following error messages:


    MSIMN caused an Invalid Page Fault in module unknown

    *****
    MSIMN caused an invalid page fault in module MSOE.DLL at memory address
    *****
    MSIMN caused an Invalid Page Fault in module kernel32.dll


    *****
    CAUSE
    *****
    This issue can occur if you are using one of the following
    rules that are applied before the message is downloaded from the server:

    Condition: Where the message body contains specific words
    Action: Do not download it from the Server


    Condition: Where the message body contains specific words
    Action: Delete it from Server


    Condition: Where the message is secure
    Action: Do not download it from the Server


    Condition: Where the message is secure
    Action: Delete it from Server


    Condition: Where the message has an attachment
    Action: Do not download it from the Server


    Condition: Where the message has an attachment
    Action: Delete it from Server

    *********
    RESOLUTION
    ********
    To work around this issue:

    Disconnect from the Internet, and then start Outlook Express. If you are prompted to establish a Dial-Up Networking connection, click Cancel.


    On the Tools menu, click Message Rules, and then click Mail.


    Find the rule that is configured with either or both of the following actions, and then click to clear the check box next to it:


    Do not Download it from the server


    Delete it from Server


    Click OK.










    __________________
    Like your body your mind also gets tired so refresh it by wise sayings.
    limur غير متواجد حالياً





المواضيع المتشابهه

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  

أضف موقعك هنا| اخبار السيارات | حراج | شقق للايجار في الكويت | بيوت للبيع في الكويت | دليل الكويت العقاري | مقروء | شركة كشف تسربات المياه | شركة عزل اسطح بالرياض | عزل فوم بالرياض| عزل اسطح بالرياض | كشف تسربات المياة بالرياض | شركة عزل اسطح بالرياض