كيف أسوي سكربت يغير DNS شركة جودادي أو اي شركة

[Mr.Gphp]

كيف أسوي سكربت يغير DNS شركة جودادي أو اي شركة

يعني أي شركة ممكن .. كيف أغير DNS

[Ameen Al-Harbi]

مافهمت قصدك تقصد تحكم بالدومين ؟

اذا كان قصدك تحكم بالدومين , بعض المزودين يوفر API تقدر تستخدمه , والأغلب لا يسمح لك باستخدام سكربت خاص فيك

[Mr.Gphp]

أخوي .. نعم أغير DNS
ممكن تشرح لي ... بالله عليك
يعني عندي دومين وعندي سيرفر
وأبغا أسوي سكريت
تمام يغير للعميل من لوحة تحكم خاصة به

[Ameen Al-Harbi]

أخوي .. نعم أغير DNS
ممكن تشرح لي ... بالله عليك
يعني عندي دومين وعندي سيرفر
وأبغا أسوي سكريت
تمام يغير للعميل من لوحة تحكم خاصة به

شركة Enom توفر لك هالميزة , إطلع على سكربت الـ API المجاني اللي يوفرونه للريسلر , وولثائق في موقعهم

Godaddy ما تسمح بهالشي , Godaddy ما تمكنك انك تحصل على واجهة تحكم خاصة فيك , هذا حسب معلوماتي القديمة جداً , ولا أعتقد ان الوضع تغير , وإلا كان الطلب على ريسلر Godaddy أكبر

[Mr.Gphp]

أخواني ... فيه واحد يقول لي يمكن لا يقول الشرح يطول ... فياريت واحد يحدد لنا الدوال
أو الطريقة وساعدنا

[Ameen Al-Harbi]

تحديث : حسب ما قرأت في موقعهم الآن , يوفرون لك API , ولكن هل هو Open Source ولا لا , الله أعلم

يا أخي موب عايقه لو تطلع على السكربت اللى موفرينه

[Mr.Gphp]

أخوي نزلته لكن مني قادر أركبه على الأباتشي

[Ameen Al-Harbi]

ارسله لي على الاي ميل ,

[Mr.Gphp]

أخوي أضفني على الماسنجر
geh1410@hotmail.com

[Mr.Gphp]

مني محصل إيميلك

[Mr.Gphp]

******************************
Installing the PHP Sample Site
******************************

NOTE: This set of scripts was developed and tested on Apache-AdvancedExtranetServer/2.0.47 (Mandrake Linux/1.6.91mdk) mod_perl/1.99_08 Perl/v5.8.0 mod_ssl/2.0.47 OpenSSL/0.9.7a PHP/4.3.1

**This set of scripts has been thoroughly tested on Linux. Installations on non - Linux OS's is not guaranteed. Using Windows and IIS is not ideal.


A complete sample site in PHP is located in the 'scripts' directory. The sample site will allow you to register and administer domain names through eNom's reseller interface.

Minimum requirements:

You must have a web server that supports PHP. The site has been tested on Apache web server 2 with PHP4.3.x

*******************************
For PHP version 4.3.x or higher
*******************************

You must change the configuration files to the following:
session.auto_start On
session.bug_compat_42 Off
session.bug_compat_warn off

You can EITHER do this by changing the PHP config file, or, if you are using Linux/Apache you will need an .htaccess file set up in the root directory(see bottom of page for setting this up). This file will override the default SESSION state of the PHP processor, so that you can utilize the session code written in these scripts. Add the following entries to the .htaccess file:

<IfModule mod_php4.c>
php_flag register_globals on
php_value session.auto_start 1
php_value session.bug_compat_42 0
php_value session.bug_compat_warn 0
</IfModule>

*This assumes you have mod_php4 running on your server

**********************************
Installing the Site on Your Server
**********************************

Follow these steps to install the Sample Site on your server. All files for the PHP sample site are located in the 'scripts' directory.

1) Copy the entire contents of 'scripts' into the root web directory of your web server, or any subdirectory.

2) make sure to set permissions:

A) Set permissions on folders /css and /Setup to 777(UNIX), or read/write/execute(win32)

B) Set permissions on css/style.css to read and write for Public.

C) Set permissions on all files in Setup/ to read, write and execute for Public.

D) Set permissions on root directory and all files in root directory to read and execute for Public.

E) Set permissions on directory and all files in /include directory to read and execute for Public.

F) Set permissions on directory and all files in /js directory to read and execute for Public.

G) Set permissions on directory and all files in /popUps directory to read for Public.

3) Edit /include/sessions.php with your username and password.

- be sure to set $siteName at /include/sessions.php, line 6

5) Set $PageTitle on all pages; $SiteName and $PageTitle appended together will be the 'title' for each page.

6) Adjust the logo, or put in text : /include/header.php

7) Use the setup scripts to configure your site appearance and TLD offerings:
Browse to the /Setup directory, run BOTH StylesSetup.php and TLDSetup.php

8) Change permissions again:
Now that you have configured your site, this last change is done for security.folder css and Setup should be set to 755(unix), or read/write(win32)

NOTE: You may also choose to remove the /Setup directory altogether at this point.

At this point the Sample Site should be ready. Open http://<your_server_ip>/<your_directory>/index.php in your browser and you should see the sample site home page.

************************
Going Live with the code
************************

The server the site connects to can be set in the file EnomInterface_inc.php. The default is our test server at resellertest.enom.com. When you are ready to go live, change this value to reseller.enom.com.

YOU MUST send in your IP address for live transactions, send to resellersupport@enom.com. Include your UID.

****************
Resolving Errors
****************

If you have trouble getting the PHP files to run, you may have to contact your system administrator to get PHP installed and/or set up on your server.

OR

Contact resellersupport@enom.com for installation errors on the scripts.

****************
Additional Notes
****************

.name and .name + email forwarding is built in to this distro, but has not been completely tested. It is advised to test thoroughly before using

.uk has not been tested with this release; since it is an email based registration system, it may prove difficlut to develop
There is an include file named uk.php. This could potentially be used in the same fashion that the scripts for .us and .ca are used.

.ca registry is very strict; expect difficulty in some registrations and updates


***************************
Setting up a .htaccess file
***************************

At the command prompt, type the following (you can use emacs, vi, pico...):
1. type: emacs .htaccess
2. (add the directives from above)
3. save file, in emacs: ctrl+x, crtl+s
4. exit, in emacs: ctrl-x, ctrl-c
5. allow access to file for Apache, type: chmod a+r .htaccess

[Ameen Al-Harbi]

تفضل

me يعني أنا طال عمري

+ دومين موقعي swanderer.ws

[Mr.Gphp]

للرفع

[Wael is the winner]

الله يوفقك