السلام عليكم

اخواني لدية سيرفر vps وعلية موقع واحد . الموقع يحتوي العديد من الملفات للداون لوود .

الموقع كان على في بي سي برام 512 ميجا وكان كل شيء تمام

اشتريت vps اخر برام اقوى 2 جيجا . ولكن اصبحت مشكلة هي ان الاباتشي يستهلك الرام كامل في ساعات معينه من النهار .

فمثلا احيانا لديه فقط 4 زوار رغم ذلك اجد استهلاك الرام يصل الي 1 جيجا واحيانا 15 زائر ولكن الرام كله قد انتهى ويتوقف السيرفر لحتى اعد تشغيل الاباتشي مره اخرة ريستارت.

فامر غريب كان الموقع 512 ميجا تمام والان 2 جيجا واوجة مشكلة استهلاك الرام . فاتوقع المشكلة تكمن بظبط الاباتشي .

استخدم لوحة تحكم directadmin وهذا ملف الاعدادت على ما اتوقع
httpd-mpm.conf

يحتوي .
#
# Server-Pool Management (MPM specific)
#

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# Note that this is the default PidFile for most MPMs.
#
<IfModule !mpm_netware_module>
PidFile "/var/run/httpd.pid"
</IfModule>

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
LockFile /var/logs/accept.lock
</IfModule>
</IfModule>

#
# Only one of the below sections will be relevant on your
# installed httpd. Use "apachectl -l" to find out the
# active mpm.
#

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
ServerLimit 450
MaxClients 450
MaxRequestsPerChild 10000
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
ServerLimit 450
MaxClients 450
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 10000
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients: max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule mpm_beos_module>
StartThreads 10
MaxClients 50
MaxRequestsPerThread 10000
</IfModule>

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum number of requests a thread serves. It is
# recommended that the default value of 0 be set for this
# directive on NetWare. This will allow the thread to
# continue to service requests indefinitely.
<IfModule mpm_netware_module>
ThreadStackSize 65536
StartThreads 250
MinSpareThreads 25
MaxSpareThreads 250
MaxThreads 1000
MaxRequestsPerChild 10000
MaxMemFree 100
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process,
# to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpm_mpmt_os2_module>
StartServers 2
MinSpareThreads 5
MaxSpareThreads 10
MaxRequestsPerChild 10000
</IfModule>


وغريب ان ملف my.cnf لا يحتوي شيء فقط
[mysqld]
local-infile=0

موقعي لايزيد عدد المتواجدين فيه في وقت واحد عن 70 زائر في احسن الظروف . وبه داونلوود كثير . ولكن 2 جيجا ميموري ومسموح لي 1 جيجا زيادة burst ورغم ذلك مش ملحق ع الاباتشي .

__________________
ليس كل ما يتمنى المرء يدركة

غير في
MaxRequestsPerChild 10000
الى
MaxRequestsPerChild 0

__________________
احصل على موقعك الان مجاناً
www.201mb.com

شكرا لك

هل من شرح لهذه الاعدادت وما اهميتها

#
# This configuration file reflects default settings for Apache HTTP Server.
#
# You may change these, but chances are that you may not need to.
#

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 60

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 1

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Major

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off




<IfModule mod_rewrite.c>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</IfModule>

__________________
ليس كل ما يتمنى المرء يدركة