السلام عليكم ...
شباب انا عندي لوحة الام من شركه سولتيك
SL-67EV-1
وابغى اسوي اب قريت للبيوس وياريت تساعدونى بالطريقه ....
انا دخلت موقع الشركه ونزلت الملفات التاليه :
awdflash
67ev-v7.bin
ياريت تقولولى كيف الطريقه علما ان جهازي بنتيوم 3 سرعه 700 ...
السلام عليكم ...
شباب انا عندي لوحة الام من شركه سولتيك
SL-67EV-1
وابغى اسوي اب قريت للبيوس وياريت تساعدونى بالطريقه ....
انا دخلت موقع الشركه ونزلت الملفات التاليه :
awdflash
67ev-v7.bin
ياريت تقولولى كيف الطريقه علما ان جهازي بنتيوم 3 سرعه 700 ...
__________________
اذ لم تستحى ففعل ما شئت!
حياكم الله بموقعكم www.arabhardware.com
---------------------------
للتواصل عبر المسنجر :
ahw_net@hotmail.com
شباب نزلت الملف الى يساعدنى على الاب جريت وياريت احد يعطينى الطريقه باختصار مكتوب بالملف :
Note: Normally, to upgrade BIOS that is unnecessary if the system is working
fine without any problem, user should upgrade the bios unless you
experienced incompatible problem or need BIOS upgrade to create new features.
However, please read all information in this section before upgrading.
،§AWDFLASH.EXE ،¨is a Flash EEPROM Programming utility that updates the BIOS by
uploading a new BIOS file to the programmable flash ROM on the motherboard.
This program only works in pure DOS environment, the utility can not be worked
in win95/98, ME ,NT or Windows 2000 environment .
Upgrading the system BIOS
Step 1. Please visit the board maker،¦s website, download the newest BIOS file and
newest award flash utility ،§AWDFLASH.EXE،¨ for the motherboard. The BIOS
file you downloaded will be a *.bin format.
Stop 2.Creat a bootable diskette. Then copy the bios file and award flash utility
،§AWDFLASH.EXE،¨ into the diskette.
Step 3. Insert the diskette into drive A, reboot you system and boot form the diskette.
Step 4. When booting is finished, type awdflash *.bin /sn/py/cc/ and then press <Enter>
to run BIOS upgrade program. (*.bin depends on your motherboard model and version
code for example "75KV-q4.bin /sn/py/cc").
Step 5.After upgraded, please press <F1> or <F10> to exit or reset your system.
Warning! If there appears Write Fail While Award ،§FLASH MEMORY WRITER ،§ verifying
Flash memory, just repeat the process, please DO NOT reset or turn off the system.
If the award memory flash utility was not able to update the bios successfully, you
system may not able to boot up.
Step 6. You will see a message ،§CMOS checksum error -Default loaded ،¨ during booting the
system. Please press <Del >to run CMOS setup utility, then reload ،§LOAD SETUP
DEFAULTS ،¨ or ،§Load Optimized Defaults،¨ and save this change..
The parameters of AWDFLASH.EXE
/sn:No original BIOS backup
/py:Program flash memory
/cc:Clear CMOS data after programming
NOTE: User can type AWDFLASH /? to get further details about parameters. Wrong usage of
parameter will damage the BIOS information, so that we strongly recommend user to leave
parameters away unless you realize their function.
،EAfter upgraded, please press <F1> or <F10> to exit or reset your system.
Warning! If there appears Write Fail While Award ،§FLASH MEMORY WRITER ،§ verifying Flash
memory, just repeat the process, please DO NOT reset or turn off the system. If
the AWARD MEMORY FLASH utility was not able to update the bios successfully, you
system may not able to boot up.
NOTE: You will see a message ،§CMOS checksum error -Default loaded ،¨ during booting the
system. Please press <Del >to run CMOS setup utility, then reload ،§LOAD SETUP DEFAULTS
،¨ or ،§Load Optimized Defaults،¨ and save this change..
ارجوا منكم المساعدة علما ان الوندوز عندي 2000 بروفيشنال
__________________
اذ لم تستحى ففعل ما شئت!
حياكم الله بموقعكم www.arabhardware.com
---------------------------
للتواصل عبر المسنجر :
ahw_net@hotmail.com
الخيار لك ولكني أنصحك بأن لا تفعل لأن التعديلات المضافة على البيوس ليست مهمة
واعتقد الوليد سوافقني الرأي
http://61.13.211.131/English/download/S67EV.html
بسم الله الرحمن الرحيم
اتفق مع اخى مبارك بان المشكلة التى تم حلها باخر ترقية للبيوس غير مهمة، الا اذا اردت تبديل المعالج الحالى الذى لديك.
ماهى نسخة البيوس التى لديك حاليا وهل تعانى من اى مشاكل ؟
شكرا لكم اخوانى على الاجابة اخى الوليد انا ما عندي مشكله بالبيوس لكن حبيت اعرف كيف الطريقة لتقريه البيوس فى لوحات الام سولتيك وهل تختلف عن بقيه اللوحات االام واجوا منك ان تقول لى ما هى المشكله التى تم حلها مع ترقيه البيوس وشكرا
__________________
اذ لم تستحى ففعل ما شئت!
حياكم الله بموقعكم www.arabhardware.com
---------------------------
للتواصل عبر المسنجر :
ahw_net@hotmail.com
بسم الله الرحمن الرحيم
الترقية الاخيرة تم بها اضافة دعم لمعالجات انتل ذات شكل FC-PGA.
ترقية البيوس هى تقريبا نفس الطريقة المتبعة مع الانواع الاخرى من البايوس. تعمل قرص بدء تشغيل وتنقل اليه الملفين ومن ثم تشغل جهازك من القرص وتدخل امر الترقية. بموجب الملفين الذين انزلتهما فان امر الترقية سيكون
awdflash 67ev-v7.bin /sn /cy /cc
بعد انتهاء الترقية تضغط F10 للخروج من البرنامج وتعيد تشغيل الجهاز بعد ازالت القرص المرن. تدخل مباشرة الى البيوس وتختار Load Setup Defaults وتحفظ التغييرات ومن ثم تعيد تشغيل الجهاز.